1. Gather the necessary tools and supplies you will need to install the Golf Cart clutch kit, such as a torque wrench, oil filter socket, screwdriver, grease, Allen wrench, and socket set.

2. Disconnect the negative battery cable from the golf cart, and use the socket set to remove the existing clutch from the engine.

3. Clean the flywheel mating surface before installing the new clutch. Use a metal brush to remove any dirt or grease.

4. Lubricate the flywheel mating surface with a thin layer of grease.

5. Install the pressure plate to the clutch disk, aligning the dowel pins with the holes in the flywheel.

6. Place the clutch disk over the flywheel, making sure the dowel pins are aligned.

7. Install the clutch kit following the instructions provided by the manufacturer. Be sure to use the correct amount of torque when securing the bolts.

8. Check all the connections for tightness before reconnecting the battery.

9. tested to make sure the clutch engages properly and the engine starts.

10. If all is correct, reattach the negative battery cable and your Golf Cart clutch kit is installed.

“Keyword”
“yamaha golf cart clutch rebuild kit”
“yamaha golf cart clutch removal tool”
“yamaha golf cart clutch puller homemade”
“yamaha golf cart clutch diagram”
“yamaha golf cart secondary clutch diagram”
“yamaha golf cart clutch problems”
“yamaha g29 clutch upgrade”
“yamaha golf cart secondary clutch install”